Edge Patriot Home Position Setting
In this instructional video, we go over the procedure for home referencing the pusher and also setting the home condition properly. It starts with making sure the right parameter is set on the HMI.
Learn how to remove a Guide Channel Set on a Patriot 338 and 551 Bar Feeder. All it takes are 3, 5, and 10-mm hex allen wrenches, gloves and safety glasses....
[dvg_divi_video_gallery _builder_version="4.27.0" _module_preset="default" columns="1" hover_enabled="0" sticky_enabled="0"][dvg_divi_video_gallery_item...
Steps to Zero Reference a Patriot 338 Bar Feeder: 1 - Make sure Bar Pusher is OFF Home Position 2 - Press and hold "Forward" and " Reverse" simultaneously 3 - Touch...
In this instructional video, we go over how to recover when a channel is closed on a pusher or when you receive a bar condition on an Edge Patriot Bar Loader....
In this instructional video, learn how to install a Guide Channel Set on a Patriot 338 and 551 Bar Feeder. We provide you with all the tips and tricks you will need, as...