Edge-U-Cation:
The Best Bar Feeder Videos
Other Helpful Sources
How Does the Bar Feeder Load Random Length Bars?
Imagine you got bar stock from your suppliers that came at random lengths. Or you have materials left over or didn’t use a full bar, and you want to use that in the...
Why 2nd End of Bar May Be Exactly What You Need for Your Applications Running Longer Parts
Since 2025, we’ve seen an increase in shaft work – more shops making longer parts. 2nd End of Bar (also referred to as EOB protocol or end-of-bar programming) is an...
The Importance of Hydraulic Oil to Achieve the Hydrodynamic Bearing Effect in Bar Feeding Operations on CNC Lathes
In high-speed CNC lathe operations, 12 and 6 ft bar feeders use hydraulic oil to achieve the hydrodynamic effect (sometimes called the hydrostatic effect). The...
Bar Straightness and Other Things to Consider for High RPMs
To optimize CNC lathe RPM in bar-fed applications, bar stock should not exceed 0.007" TIR (Total Indicator Runout — the total deviation measured as the bar rotates,...
4 Applications Perfect for Slug Loading
Short loaders, or spindle-length loaders, can be a very cost-effective solution. They occupy minimal floor space, don't need to be attached to the bar stock, and don't...
Why RS Technology Is a Game Changer
RS Technology is a patented redesign of how a bar feeder connects to a Swiss-type lathe. Traditional bar feeders use a telescopic nose — a collapsible tube that bridges...
6 Applications Where Auto Adjust Can Save You Tons of Time
Guide channel changeovers can take time. Depending on the bar feeder model and condition, and the expertise of the machinist, they can take up to 30 minutes. And, many...
Everything You Need to Know about Automatic Magazine Bar Feeder Compatibility and Integration
Here’s everything you need to know about automatic magazine bar feeder compatibility and integration. Compatibility refers to whether the bar feeder is...