Menu Close

Scout 320 Bar Feeder

Make: EDGE | Bar Length: 12' | Bar Diameter: 0.118” – 1.062”

The Scout 320 is a magazine style automatic bar feeder designed for feeding round, square and hexagonal bar stock in lengths up to 12′, in a diameter range of 3-27 mm, into CNC lathes.

The Scout 320 comes equipped with a Mistubishi controller and Servo drive standard. It also features dual anti-vibration devices that stabilize the bar stock at two critical points between the guide channel and lathe spindle maximizing RPM potential. The polyurethane guide channels increase strength and stability.

If you need a quality bar feeder on a limited budget, look no further than the Scout 320 SE.

Features: Scout 320

  • Bar diameter capacity: 3 mm to 27 mm (.118” to 1.062”)
  • Automatic loading magazine — 8 linear inches of rack capacity
  • Double pusher, space saving design
  • Polyurethane Quick Change guide channel — noise & vibration dampening
  • Hydrodynamic support via high volume oil flow into channels
  • Mitsubishi motion control — dependable and user friendly, allows easy bar feeder parameter changes-belt drive unit
  • Dual anti-vibration devices—one internal to the bar feeder, the other mounted between the telescopic nose and the lathe headstock
  • (1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See chart below (spindle liner required if channel set is not lathe’s max capacity)
  • (1) Standard telescoping front nose matched to the guide channel set
  • (1) O.D. bar stock collet (to be chosen by customer, specific collet needed for each stock diameter)
  • Swiss headstock synchronization device
  • Automatic remnant retraction, self centering gripper
  • Custom lathe cable and interface plugs
Technical Specifications: Scout 320
Bar diameter capacity-no bar preparation:3 mm to 25.4 mm (.118” to 1.000”)
Bar diameter capacity-with bar preparation:3 mm to 27 mm (.118” to 1.062”)
Maximum bar length:3800 mm (12 feet 5 inches)
Maximum remnant length:420 mm (16.500”)
Magazine rack capacity:8”
Bar loading cycle time:35 seconds for 12-foot bar
Material straightness specification:.007” TIR/foot of material (V blocks, 3 points equidistant)
Feed force (pusher torque):max 450 N, adjustable
Forward feed rate:1400 inches/minute max, adjustable
Return feed rate:2360 inches/minute max, adjustable
Power consumption:1.5 kW – (2 kVA)
Operating voltage:230V/60Hz 3-phase
Control voltage:24V DC
Oil capacity:46 liters (12 gallons)
Oil viscosity:ISO 100 cST
Compressed air supply:6 bar (90 psi)
Compressed air consumption:approx. 8 liters per loading cycle
Machine weight:926 lbs
ChannelPusher ØMinMaxMax Bar With Remnant Ejection
87.53mm (.118”)6.4mm (.250”)7mm (.275”)
11103mm (.118”)9mm (.354”)10mm (.393”)
14123.2mm (.125”)11mm (.437”)13mm (.512”)
16155mm (.196”)12.7mm (.500”)15mm (.594”)
18165mm (.196”)14.2mm (.562”)17mm (.669”)
20188mm (.315”)18mm (.709”)19mm (.750”)
22208mm (.315”)19mm (.750”)21mm (.826”)
24238mm (.315”)20mm (.787”)23mm (.905”)
282510mm (.393”)25.4mm (1.000”)27mm (1.062”)
Edge Scout 320 dimensions