FMB Turbo 5-65 A
The FMB Turbo 5-65 A is your solution for heavy bar stock, designed for longer run productions on bigger turning centers. Its cast iron base dampens vibrations 10x more effectively than steel.
A Testimonial from Landon Martin, United Brass Works
“Within the first week of being able to have this machine, and being able to see the difference on our production floor, from setup to setup, especially when you’re setting up one machine multiple times in a day, it is about 4 hours of production a day has been saved by going to the Auto Adjust.”
Hear the story from Landon Martin, Machining Manager at United Brass Works, about how setup times went from 1 hour to 5 minutes when the company switched to an Auto Adjust.
Auto Adjust Feature
The Auto Adjust feature is a feature on the bar feeder set that enables the channel to automatically change from one size to another. The guide channel defaults to the maximum allowable diameter. Using a controller, you change two parameters, a series of clam shells adjust through the bar feeder to your material size, and then you swap out the bar feed collet with an Allen wrench and a couple of set screws, and you’re onto your next job.