Shrink Changeovers from 1 Hour to 5 Minutes
Changeovers are a manual process.
The good news is we got you.
Auto Adjust technology can shrink that changeover time from 1 hour to five minutes. And the good news is, we’ve proven it for over 10 years.
Here's how it works:
The Auto Adjust feature enables the channel to automatically change from one size to another. The guide channel defaults to the maximum allowable diameter. Using a controller, you change two parameters, a series of clamshells (curved, hinged inserts that line the inside of the guide channel and cradle the bar stock during feeding) adjust through the bar feeder to your material size, and then you swap out the bar feed collet, and you’re on to your next job.
We've saved shops as much as 4 hours production time a day.
Check out our article on 6 applications that are perfect for Auto Adjust.
https://edgetechnologies.com/6-applications-where-auto-adjust-can-save-you-tons-of-time/
Keep in Touch
When you share your email, you can expect:
1) A response within 24 hours
2) Access to tons of helpful resources