Edge Patriot Home Position Setting

Edge Patriot Home Position Setting

In this instructional video, we go over the procedure for home referencing the pusher and also setting the home condition properly. It starts with making sure the right parameter is set on the HMI.

More Videos

Bar Feeder How-To: Zero Reference Patriot 338 Bar Feeder

Steps to Zero Reference a Patriot 338 Bar Feeder: 1 - Make sure Bar Pusher is OFF Home Position 2 - Press and hold "Forward" and " Reverse" simultaneously 3 - Touch...

Patriot 3-38 and 5-51 Guide Channel Setup Tutorial

In this instructional video, learn how to install a Guide Channel Set on a Patriot 338 and 551 Bar Feeder. We provide you with all the tips and tricks you will need, as...

Edge Patriot 338 Nose Alignment Procedure

[dvg_divi_video_gallery _builder_version="4.27.0" _module_preset="default" columns="1" hover_enabled="0" sticky_enabled="0"][dvg_divi_video_gallery_item...

Edge Patriot Jammed Channel Recovery

In this instructional video, we go over how to recover when a channel is closed on a pusher or when you receive a bar condition on an Edge Patriot Bar Loader....

Bar Feeder How To – Removing Guide Channel on Patriot 3-38 and 5-51

Learn how to remove a Guide Channel Set on a Patriot 338 and 551 Bar Feeder. All it takes are 3, 5, and 10-mm hex allen wrenches, gloves and safety glasses....