FMB Pusher Closed on Bar Recovery
More Videos
FMB Turbo 5-55 Channel Change
Edge Technologies demonstrates a channel change on an FMB 5-55. The FMB 5-55 boasts one of the fastest channel changes in the CNC lathe automation industry....
FMB Bar Loader Solved “Press Upon Not Correct” Alarm
Press Upon Not Correct? How do you troubleshoot that alarm when it appears? Regional Service Manager Brian Grisez shows how to recover an FMB bar feeder from an alarm...
FMB Turbo 4-45 RS-V
[dvg_divi_video_gallery _builder_version="4.27.0" _module_preset="default" columns="1" hover_enabled="0" sticky_enabled="0"][dvg_divi_video_gallery_item...
Bar Feeder How-To: Zero Reference FMB Turbo 3-38
Steps to Zero Reference a Patriot 338 Bar Feeder 1 - Make sure Bar Pusher is OFF Home Position 2 - Press and hold "Forward" and " Reverse" simultaneously 3 - Touch...
FMB Indradrive Reset Procedure
In this instructional video, Regional Service Manager Brian Grisez describes how to perform a control reset, or Servo reset, on an FMB Bosch Indradrive-controlled Bar...
FMB Telescopic Nose Alignment Procedure
[dvg_divi_video_gallery _builder_version="4.27.0" _module_preset="default" columns="1" hover_enabled="0" sticky_enabled="0"][dvg_divi_video_gallery_item...
Bar Feeder How To – Programming The Turbo 3-38 HMI
In this video we show you some quick steps on programming your HMI for the FMB Turbo 3-38 Bar Feeder, starting with the top left Menu icon, and moving to the Program...
FMB Turbo 3-38 RS by Edge Technologies
In this video, Regional Service Manager Brian Grisez demonstrates the new FMB Turbo 3-38 RS. This revolutionary machine will improve performance within the sliding...
Bar Feeder How-To: Roller Steady Adjust an FMB Turbo 3-38 Bar Feeder
Steps to Adjust a Roller Steady on a Turbo 338 Bar Feeder 1 - Load bar stock into feed collet & lathe collet, clamped and on-center 2 - Remove housing door on...