Bar Feeders

The Rebel V-65 Servo short loader is a compact bar loading system for CNC lathes. V-65 features include a large magazine capacity, easy programming, audible alarm, axial shift, feed force, linear feed Servo drive and optional slug feed.

Rebel V-65 Servo Bar Feeder

5.0mm - 65mm | 0.196 - 2.630"

Bar Length: Short

Headstock Type: Fixed

The Rebel 80 Servo is a compact bar loading system for CNC lathes. Features include a large magazine capacity, easy programming, easy centerline adjustment, remote control axis jog, all electric operation, linear feed, Servo drive, and a soft load design.

8.0mm - 80mm | 0.315" - 3.150"

Bar Length: Short

Headstock Type: Fixed

The Rebel 102 Servo SE is a compact bar loading system with a large magazine capacity, conversational programming, user-friendly software, programmable bar diameter & part length, remote control axis jog, linear feed & Servo drive, and a rotating stock that does not come in contact with the loading magazine, allowing high speed machining, especially in hex, square and profiled stock.

Rebel 102 Servo SE

8mm - 102mm | 0.315" - 4.000"

Bar Length: Short

Headstock Type: Fixed

The Rebel 80 Servo Unloader is a compact unloading system for CNC lathes with user friendly software, Servo controlled positioning for unloading of parts, touch screen and menu driven programming, fold away axial track, an axial shift that allows for spindle liner changes.

Rebel 80 Servo Unloader

8mm - 80mm | 0.315" - 3.150"

Bar Length: Short

Headstock Type: Fixed

The FleXsys LE is a loading and unloading system for automation, specifically long shaft jobs

FleXsys LE Load/Extract

10mm - 66mm | .394" - 2.598"

Bar Length: Short

Headstock Type: Fixed

Edge Ranger 112 bar feeder is a magazine style automatic bar feeder with a double pusher, dual anti-vibration devices, gripper that holds and inserts the new bar into the bar collet and is also used to extract the remnant, rotating tip & collet, bushing blocks, sync device, belt drive, remote pendant and operator control panel.

Ranger 112 Bar Feeder

1.5mm - 15mm | 0.059" - 0.590"

Bar Length: 12'

Headstock Type: Fixed, Sliding

The Scout 320 is a magazine style automatic bar feeder designed for feeding round, square and hexagonal bar stock in lengths up to 12', in a diameter range of 3-27 mm, into CNC lathes. The Scout 320 comes equipped with a Mistubishi controller and Servo drive standard. It also features dual anti-vibration devices that stabilize the bar stock at two critical points between the guide channel and lathe spindle maximizing RPM potential. The polyurethane guide channels increase strength and stability.

Scout 320 Bar Feeder

3.0mm - 20mm | 0.118" - 1.062"

Bar Length: 12'

Headstock Type: Fixed, Sliding

The Minuteman 320 SE has a double pusher, dual anti-vibration devices, a gripper device that holds and inserts the new bar into the bar collet and is also used to extract the remnant, a rotating tip & collet, and a sync device.

Minuteman 320 SE Bar Feeder

3.0mm - 20mm | .118" - 1.062"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The Edge Technologies Patriot 338 Bar Feeder is designed with a double pusher, stock size adjustment, universal bushing blocks, a dual anti-vibration bushing device, self-centering gripper that holds and inserts the new bar into the bar collet and is also used to extract the remnant, a rotating tip & collet, an oil reservoir that allows for full storage of collets and bushing blocks in the back stand, and touch screen control.

Patriot 338 Bar Feeder

3.0mm - 38mm | 0.118 - 1.500"

Bar Length: 8', 12'

Headstock Type: Fixed, Sliding

The Edge Technologies Patriot 551 Bar Feeder is designed with a double pusher, stock size adjustment, universal bushing blocks, a dual anti-vibration bushing device, self-centering gripper that holds and inserts the new bar into the bar collet and is also used to extract the remnant, a rotating tip & collet, an oil reservoir that allows for full storage of collets and bushing blocks in the back stand, and touch screen control.

Patriot 551 Bar Feeder

5.0mm - 51mm | 0.196" - 2.145"

Bar Length: 8', 12'

Headstock Type: Fixed, Sliding

The Micromag 20 Bar Feeder is an automatic magazine style bar feeder equipped with a single bar pusher design that can reduce bar change time by 50%, a feed mechanism that is automatically pulsed to ensure the profiled material is successfully located in the lathe collet / chuck, length monitoring and quick-change guide channels.

Micromag 20 Bar Feeder

0.8mm - 20mm | .031" - .787"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 2-20, available in either 6' or 12' configuration, is an automatic bar feeder for processing bars in the diameter range of 2-20 mm in lengths from 6’ to 14’ on CNC lathes. Equipped with a Swiss type headstock synchronization device, peck drilling and threading on small diameter bars is simple and done with high-tolerances. The Turbo 2-20 is designed to automatically feed round, square or hexagonal bars into CNC lathes.

Turbo 2-20 Bar Feeder

2.0mm - 20mm | 0.078" - 0.787"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The FMB Minimag 20 Bar Feeder is an automatic magazine style bar feeder equipped with a single bar pusher design that can reduce bar change time by 50%

Minimag 20 Bar Feeder

2.0mm - 20mm | .078" - .787"

Bar Length: 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 3-26, available in either 6' or 12' configuration, is a magazine style automatic bar feeder designed for feeding round, square and hexagonal bar material into all types of sliding, fixed, CNC, or cam operated lathes. Quick change polyurethane guide channels allow for quiet operation of the Turbo 3-26 at high RPM while feeding round, square or hex bar stock. The Turbo 3-26 is compatible with all types of sliding or fixed, CNC or cam operated lathes with spindle bores up to 38mm.

Turbo 3-26 Bar Feeder

3.0mm - 26mm | 0.118" - 1.023"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 3-38, available in 6' or 12' configurations, is an magazine type, automatic bar feeder designed for feeding round, square and hexagonal bar material into all types of sliding, fixed, CNC, or cam operated lathes. Quick change polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock.

Turbo 3-38 Bar Feeder

3.0mm - 38mm | 0.118 - 1.500"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

Turbo RS 3-38 Bar Feeder

3.0mm - 38mm | .118 - 1.500"

Bar Length: 12'

Headstock Type: Sliding

The Turbo 5-55, 5-65, and 8-80 are compatible with all kinds of fixed headstock lathes. Swiss type synchronization device is also available.

Turbo 5-55 Bar Feeder

5.0mm - 55mm | 0.196" - 2.165"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 5-65, available in 6' or 12' configurations, is an automatic bar feeder for processing bars in the diameter range of 5-65mm and in lengths up to 3200mm, 3800mm, or 4200mm on machine tools. Quick change polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock.

Turbo 5-65 Bar Feeder

5.0mm - 65mm | 0.196" - 2.559"

Bar Length: 6', 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 5-65 A (Auto-Adjust) is a magazine style automatic bar feeder for processing bars in the diameter ranges of 5-65mm and in lengths from 12’ to 14’ on CNC lathes. Auto adjusting polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock. The Turbo 5-65 A is compatible with all kinds of fixed headstock lathes. Swiss type synchronization device is also available.

Turbo 5-65 A Bar Feeder

5.0mm - 65mm | 0.196" - 2.559"

Bar Length: 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 8-80, available in 8' or 12' configuration, is an automatic bar loading magazine feeder for processing bars in the diameter range of 8-80mm and in lengths up to 3200mm, 3800mm, or 4200mm on machine tools. Quick change polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock.

Turbo 8-80 Bar Feeder

8.0mm - 80mm | 0.315" - 3.150"

Bar Length: 10', 12'

Headstock Type: Fixed, Sliding

The FMB Turbo 20-100 expands on the already established Turbo "Heavy Metal" line of hydrodynamic 12' through 24' bar loading magazine feeders. This unit also offers a one size channel set that automatically adjusts for all material sizes. Quick change polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock. The Turbo 20-100 automatic bar feeder is compatible with all types of sliding or fixed, CNC or cam operated lathes with spindle bores up to 102mm.

Turbo 20-100 Bar Feeder

20mm - 100mm | 0.787" - 4.00"

Bar Length: 12'

Headstock Type: Fixed, Sliding